In the current modern era, the usage of routers and modems has become quite common for every individual in their homes. The broadband routers are frequently utilized in the offices and residences. Such routers come equipped with a reset button. The button is concealed within a hole on the backside of a router.
In order to evade it from pressing abruptly, the makers have arranged it in such a way. In fact, the reset button is used to revert back the device to its default configuration state just like the device has been purchased recently. If you are not fully aware of the method to reset the routers and modems then, here is a complete guide. Check it here!
Reset Button for a Router
The reset button is available on a router so that one can click it with much ease. It can be used for a precise amount of time whenever you confront issues with your router. The users must and should follow a specific sequence in order to reset the router correctly.
The sequence for resetting a router varies from one model to the other. It all depends on how a manufacturer designs the router model and the reset button. For a different type of router models, the timings might vary. The most common way to perform a router reset is to use the 30-30-30 hard reset. This particular method works on any type of the router.
How to Do 30-30-30 Router Reset?
Here is a step-by-step procedure to perform the reset router using the 30-30-30 method. Before heading towards the actual reset process, it is good to test whether a simple reboot will be enough. Check it out!
1. Find the Reset Button
In general, the reset button or the switch appears on the router’s backside within a hole. In some cases, you can find it sticking to the router. Some of the routers even display the label saying that it is the reset button. In case, you don’t find any reset button exclusively, the WPS button might be the reset button for your router.
2. Follow 30-30-30 Sequence
- Whenever the router is turned on, you need to press and hold the reset button for about 30 seconds.
- Don’t remove your hand from the reset button and unplug the power for your router.
- By still holding the reset button for another 30 seconds, you need to turn on the power button for your router.
- Later, you must hold the reset button for the next 30 seconds.
- After completing the 30-30-30 reset process, you need to boot up your router using the factory default settings. This enables the users to access the default settings.
3. Reconfigure the Router
Once you have reset your router, you need to reconfigure it to make it work without any issues. For that, you need to change the SSID or your Wi-Fi name and password. The default router passwords will be present on the web across the internet. We always recommend the users to change their default password with some powerful password. If you don’t change your password then, there could be a risk that unauthorized people might access your internet.
What if a Router is Rebooted?
There is some sort of difference between a reboot and a reset for a router. Whenever you reboot a router, it is referred to as a power cycle that is carried out. The router will then shut down and it restarts all the functionalities of the router. It saves all the Wi-Fi settings and configurations of your device unless and until you change the factory default settings. If your router is confronting issues then, rebooting a router will save you. The method of rebooting a router is quite easy just like turning on a power button. This can be done easily via the web interface of a router.
What if a Router is Reset to its Default Settings?
By resetting a router, it completely clears the NVRAM of the router. By doing so, the complete configuration settings will be stored and continue through the normal power cycles. When the NVRAM clears the factory default settings, the functionality of the router will be clear.
When to Reboot or Reset your Router?
You can check out the reasons to reboot or reset your router as given below:
- The users need to reboot their router or modem in the following cases:
- When the Wi-Fi has stopped working or at the time of accepting new connections.
- Strange network behavior
- When there is a power issue
- If you are unable to access the web interface of the unit.
- Got a connection to a network but unable to reach the web pages.
The users need to reset their modem or router when they confront the following issues:
- When there is some odd network behavior, then, it could lead to misconfiguration.
- If there are power issues and even if the router reboot doesn’t work.
- When the web interface stops working post the configuration.
FAQs on Router Reset
1. What are the indications for a router flash?
If the lights on your router start blinking in an odd manner then, you need to find out the meaning for each flashlight.
2. Can I Reboot/Reset a Router any number of times?
There is a certain limit on how many times that one must reboot or reset a router. If you cross that limit then, it could put you at risk. Most of the people will be tired off resetting and rebooting their router due to some issues. In such a case, people might think of purchasing a new router by replacing the older and useless router.
3. When to make a factory reset for a router?
If your router is not working well then, the first thing you must do is to perform a reboot. Even if it doesn’t work properly, the final step is to hard reset a router.
That’s all! This is everything you need to know about the procedure to reset a router using the 30-30-30 reset procedure. For more doubts and queries, drop them in the comments section.